What is a dry standard, and why do the readings matter?
A dry standard is the moisture reading a material should reach before the drying is finished. It is set by comparing the wet material with an unaffected part of the same house, not by a single number applied to every surface.
Each material has its own target. Framing, subfloor, drywall and carpet hold moisture differently, and the readings are compared against an unaffected reference in the same house. A reading that looks low on one material can still be wet for another, so the crew compares each one against its own standard.
The readings also show trends. A wall that falls steadily over several visits is drying, and a wall that stops falling above the target is still holding water. The crew reads the trend along with the number, because a flat line above the target is the signal to look for the source again.
How do air movers and dehumidifiers work together?
Air movers push air across the wet surfaces and into cavities, which carries moisture into the air. Dehumidifiers take that moisture out of the air so the process keeps working.
Air movers are fans designed to move a high volume of air across a surface, rather than to cool a room. Pointed at a wet wall or floor, they lift moisture from the material into the air. The air they move is full of water vapor, and without a dehumidifier the room would soon be as wet as the materials.
Dehumidifiers collect the water vapor from the air and remove it from the space, either by condensing it or by pulling it through a desiccant. The pair works best when the air movers keep the air moving over the surfaces and the dehumidifiers keep the air dry enough to take up more moisture.
Why do some materials take much longer to dry than others?
Dense materials, thick wood and enclosed cavities hold moisture for longer, and air reaches them more slowly than it reaches an open surface.
Solid framing and a thick subfloor hold a large amount of water deep inside, and the moisture has to travel to the surface before it can be removed. Drywall dries quickly on its face but can stay wet at its core. The crew knows these differences and plans the drying time for each material.
A closed wall or floor cavity dries slowly because air cannot reach it easily. Opening a small section near the base lets the air in and shortens the drying time considerably. The openings are placed so they can be closed afterward, and the homeowner is told where they are and why.
What can the homeowner do to help the drying?
Keep doors open where the crew asks, avoid running humidifiers or wet laundry in the drying area, and leave the equipment in place until the crew removes it.
Moving furniture away from the walls gives the air movers a clear path, and removing rugs from the wet area lets the floor dry faster. A homeowner who lifts the baseboard or the shoe molding at the crew's request can speed the drying of the wall cavity behind it.
The main thing to avoid is adding moisture to the house. Running a humidifier, drying laundry indoors or leaving the bathroom door open during a shower all add water to the air the equipment is trying to dry. The crew will say what to avoid for the specific house.
How does the crew know the drying is finished?
When each material holds its target reading across a return visit, and the room has been checked for odor and for cool, damp spots that readings alone can miss.
Finishing is a decision made on the data. A material is dry when its reading reaches the target and stays there. A single low reading does not count, because the wood can briefly look dry and then rise again as moisture moves from the core to the surface.
The crew also walks the house. Odor, a cool damp feel in a wall or a soft spot in a floor can all indicate that moisture remains even when the readings look close. In those cases the crew continues the drying, checks again and does not release the equipment until the house is dry in every reading that matters.