Why does a crawl space stay wet after a storm?
Because the ground under the house holds water, and the space has little airflow to dry it, so moisture lingers after the rain has stopped.
A crawl space sits in the ground, and the soil beneath it can stay saturated for days after a heavy rain. Water seeps through the foundation or rises through the soil, and the space holds it against the joists. Vents, if they exist, may be blocked by grade or by debris, so the air does not move enough to dry the surface.
A damp crawl space can look fine from the outside and still hold water in its corners. The lowest spot collects the most, and the joists over it stay wet longest. A homeowner who sees a stain on the subfloor above a corner should check that corner before the wet season arrives.
What happens to insulation that has been wet?
Insulation that has absorbed water loses its ability to insulate, holds moisture against the joists and can sag or fall away, so it is usually removed.
Batt insulation between the joists soaks up water and hangs heavily, and the wet material keeps the wood damp for much longer than the air around it. Loose-fill or blown insulation can mat and compact, leaving gaps where the cold can reach the floor above.
Insulation that is only damp at its edge can sometimes be dried, but the readings decide. Material that has been wet throughout is removed and bagged, and the joists beneath it are dried directly. The crew notes the depth and the area so the homeowner can have it replaced correctly afterward.
Does a vapor barrier help, and what happens when it fails?
A ground cover can slow moisture from the soil into the space, but a torn or lifted barrier can trap water under it, so the barrier has to be checked as part of the cleanup.
A vapor barrier on the ground reduces the moisture that rises from the soil into the crawl space. It works only when it is intact and sealed at its edges. A tear or a gap lets the moisture through, and water that pools on top of the barrier can be trapped against the soil underneath.
When the barrier has trapped water, the crew removes the wet sections and checks the soil beneath. The barrier is replaced after the readings are good, and the homeowner is told whether the barrier was helping or whether the moisture was coming from another source.
How can a crawl space be dried when access is tight?
With a combination of air movers, dehumidifiers and ventilation, placed through an access opening and adjusted to the readings, because the air cannot move freely in a low, enclosed space.
The access opening is the main route for the equipment. Air movers are placed to push air across the joists and the soil, and the dehumidifier is set to pull moisture from the air. Where the space has vents, the crew can use them to bring in drier air or to exhaust the moisture outward.
Drying a crawl space takes patience. The air moves slowly and the moisture is spread across a large area. The crew checks the readings at the joists, the soil and the subfloor, and it adjusts the equipment until the readings show that the space is drying evenly.
What does a floor above a wet crawl space need checked?
The subfloor, the joists and the finished floor above are checked for softness, swelling, stains and gaps, because wet wood can lose strength before it shows any change on the surface.
The subfloor is the first place to check, because it sits directly above the wet joists. Softness that gives underfoot or a sag between joists is a sign of damage that drying alone will not repair. The crew measures the subfloor from below and from above where it can be reached.
The finished floor may show cupping, gaps or stains after a wet event. Those changes can improve as the floor dries, but the crew tells the homeowner which changes are cosmetic and which need repair. A floor that is still soft after the readings reach their targets needs a carpenter, and the crew says so.