Which appliance leaks cause the most interior damage?
Washing machines, dishwashers and refrigerators with water lines cause most of it, because their hoses and connections are under constant pressure or sit behind the unit where leaks go unseen.
A washing machine is the most common source of a sudden leak. The supply hoses carry water under pressure, and a hose that is old or cracked can fail during a cycle, when the water flows fastest. A drain hose that is kinked or loose can spill water across the floor during the spin.
Dishwashers and refrigerators cause slower damage. Their supply lines and drains sit behind the unit, and a drip there can run for days before it reaches the floor. The water often soaks the subfloor under the appliance first, and the surface looks dry long after the damage has begun.
Why does appliance water spread under the floor?
Water runs under the flooring and beneath the cabinets, and it reaches places the homeowner cannot see from the room.
Flooring is laid over a subfloor, and water finds the joint between the sheets or the edge at the wall. Once it is under the flooring, it spreads along the subfloor until it finds a lower point or a gap, and it can travel several feet from the source before it shows.
Cabinets add another path. A leak under a sink or a dishwasher can run into the cabinet base and along the toe kick, soaking the floor inside the cabinet. The crew opens the base of the cabinet when the readings show water there, because a closed cabinet can hold moisture for a long time.
Can the flooring be dried in place or does it need to come out?
Vinyl and laminate that are lifting, swollen or stained at the edges usually come out, because water under them does not dry through the surface and the subfloor needs to be reached.
Some flooring can be dried in place, especially when the water was on the surface for a short time and the subfloor is sound. The readings decide. If the floor has lifted, swelled or come away at the seams, it is generally removed so the subfloor can be dried directly.
Hardwood and other solid wood flooring react to water differently. It can cup, buckle or stain, and drying alone may not restore it. The crew checks the readings beneath the boards and tells the homeowner whether the boards can be kept or will need replacing once the subfloor is dry.
What does the homeowner do after the leak is found?
Shut off the supply to the appliance, unplug it, move the water-sensitive items out of reach and photograph the leak and the affected floor before anything is moved.
The homeowner can shut off the supply valve behind the appliance or at the wall if it is reachable, and unplug the appliance before stepping into any water. Towels and a bucket can slow the flow until the crew arrives. Rugs and furniture should be moved out of the wet area.
Photographs of the leak, the hose and the floor help the homeowner show what happened. Keep the failed hose or the part, if it is safe to do so, since a plumber or an insurer may want to see it. Avoid running the appliance again until the connection has been repaired.
How can a homeowner reduce the chance of a repeat leak?
Replace old rubber hoses with braided or reinforced ones, check the connections on each appliance a few times a year and keep the drain hose secured.
Rubber hoses age and stiffen, and a braided or reinforced replacement is generally more durable. The hose should be replaced on a regular schedule rather than after it fails, and a homeowner can check it for bulges, cracks and wetness at the connections.
Check the drain hose and its clamp, and make sure the hose is not kinked or pulled out of its standpipe. Look behind the appliances every few months for signs of wetness or a stain on the floor. A short inspection is much cheaper than a flooring removal.